Comparisons
Plunge All-In vs Plunge Air: Integrated System or Portable Modular Tub?
Compare Plunge All-In Gen 2 and Plunge Air by capacity, empty and filled weight, footprint, cooldown rate, portability, chiller architecture and installation.
Quick answer: choose the All-In when you want the pump, chilling, filtration, ozone and controls engineered as one appliance. Choose Plunge Air when low empty weight and a modular tub + external-chiller architecture matter more than having everything integrated into one chassis.
| Specification | Plunge All-In Gen 2 | Plunge Air |
|---|---|---|
| Water capacity | 105 gal | 105 gal |
| Dimensions | 76.75 × 31.5 × 28.75 in | 61 × 32 × 28 in |
| Empty weight | 238 lb | 28 lb tub |
| Approx. filled weight | 1,150 lb | ~904 lb before separate chiller hardware |
| Cooling architecture | Integrated | External chiller |
| Published cooling | 10–12°F/hour | 4–6°F/hour Standard Chiller; 8–10°F/hour Pro Chiller |
All-In is about reducing system assembly
The All-In packages cooling, circulation, filtration, ozone and controls into one supported product. That reduces hose routing and component-selection decisions, but it also concentrates more of the system into one larger, heavier appliance.
Plunge Air is materially easier to move when empty
The Air tub is listed at only 28 lb empty. That is the key portability advantage. Once filled with roughly 105 gallons, however, the system becomes a ~900 lb water load before the external chiller and accessories are counted. “Portable” should therefore mean easier relocation between fills, not something you move while operating.
Cooling speed depends on the chiller bundle
The All-In currently lists 10–12°F per hour. Plunge Air is listed at 4–6°F per hour with the Standard Chiller and 8–10°F per hour with the Pro Chiller. Ambient temperature, airflow and starting water temperature still change real pull-down time.
Serviceability cuts both ways
A modular external chiller can be easier to replace independently if the cooling hardware fails. An integrated system reduces connection points and gives the buyer one system architecture. Decide whether you value fewer installation decisions or more component-level separation.
Floor loading and placement
Both become extremely heavy when filled. Use total filled load, user weight and the support footprint for decks, balconies or elevated floors. The lighter Air tub does not eliminate structural-load questions once 105 gallons of water are inside it.
Decision rule
Buy All-In for appliance-like ownership and faster listed cooling in one integrated chassis. Buy Air when storage, doorway access or occasional relocation makes a 28 lb empty tub valuable and you are comfortable with external chiller plumbing.
Approved affiliate partner
Compare current Plunge systems
Use the architecture comparison first, then verify current All-In and Air bundles, chiller options and pricing directly from Plunge.
We may earn a commission if you buy through this link, at no extra cost to you. Our specifications and editorial conclusions are independent of affiliate compensation.
Primary sources
- Plunge All-In Gen 2 official specifications
- Plunge Air official specifications
- Plunge Pro Chiller official specifications
Specifications can change. We use current manufacturer pages as the primary reference and date-sensitive claims should be rechecked before purchase.